Brand new for 2015, the Gainsborough e50 8.5kW electric shower is one of our most economical showers available. A stylish gloss white and chrome finish ensure that this 8.5kW electric shower will look at home in any bathroom setting.
The 8.5kW engine is our most popular engine size and for a good reason; they’re affordable to buy and economical to run. The 8.5kW e50 shower is simple to use too; a power on LED indicator illuminates when the unit has power. The manual rotary heat control has four heat settings to choose from – low, medium, high and full cold, ideal for cooling down after exercise - and the easy glide temperature control ensures you get the water flow you want.
The shower head has four spray patterns to choose from, and cleaning the head is a doddle – simply rub the soft nozzles to remove any limescale build up. The height of the shower head can also be adjusted to suit the user’s comfort.
For peace of mind; low pressure and over heat indicator lights will activate and the shower will switch off should there be any water supply or power issues.
Please note: The e50 8.5kW electric shower has left side cable and pipe entry points so it is not suitable as a replacement product for many other Gainsborough showers. Please check if purchasing this as a replacement shower.
Also available to buy in B&Q stores, the Gainsborough e50 electric shower comes with a 1 year guarantee.
- Easy glide heat setting indicator, low, medium, high and cold
- Easy glide temperature control
- Start/stop button with ‘power on’ LED
- Self cleaning shower head with 4 spray patterns
- Height adjustable shower head
- Contemporary white and chrome finish
- Places no demand on stored hot water
- Suitable for mains cold water systems only
- BEAB Label approved
- 8.5 kW performance rated (@240V)
- Gloss white finish with white and chrome accessories
- 1 year guarantee
- Suitable for Cold Mains water supply only
- Minimum operating pressure - 0.07MPa (0.7 bar) (at a flow rate of 8 litres per minute)
- Maximum operating pressure - 1.0MPa (10 bar)
- Water entry - Bottom or rear on left side of unit, suitable for 1/2" tap connector or 1/2" to 15mm push fit type connector (not provided)
- Cable entry - top, bottom or rear on left side of unit
- Unit dimensions - H340xW235xD105mm
- Cable size chart
Please note: The Gainsborough e50 8.5 kW is designed for left hand water and cable entry points and can be easily retro fitted in place of other left hand water and cable entry point electric showers. The Gainsborough e50 8.5 kW is not suitable to replace some Gainsborough models. If you require assistance with your electric shower purchase please call our customer service line on 01959 560760.